What tubes does the Fender Prosonic - Drive use?

The Fender Prosonic - Drive uses 5× 12AX7, 1× 12AT7 preamp tubes and 2× 6L6GC power tubes.

Who famously used the Fender Prosonic - Drive?

Peter Green are among the notable players associated with the Fender Prosonic - Drive.

Fender Prosonic - Drive preset

Verified · 90/100 confidence. Complete schematic. All component values readable. Parameters derived directly from the circuit.

The Prosonic is a mid-1990s Fender Custom Amp Shop design with relay-switched channels. Channel 1 has its own Volume; Channel 2 cascades extra 12AX7 stages with Gain 1, Gain 2 and a Master. Both share Treble, Bass and Mid, followed by a 12AT7-driven spring reverb, an effects loop and a 12AX7 long-tail phase inverter. A pair of 6L6GCs give up to 60 watts, with a rectifier switch choosing a GZ34 valve or silicon diodes and a power-stage bias mode switch.

Made in: USA
Wattage: 60W
Channels: 2
Preamp tubes: 5× 12AX7, 1× 12AT7
Power tubes: 2× 6L6GC

Known for: Peter Green.

Tags: american, 6l6, high-gain, crunch, clean, two-channel.

Schematic-derived preset files for 16 Fractal and Line 6 modelers: Axe-Fx II/XL/XL+, Axe-Fx III, FM3, FM9, and the full Helix family (Floor, LT, Rack, HX Stomp, HX Stomp XL, Native).

Gridleak extracts amp parameters from original circuit schematics using AI vision — component values, gain staging, tone stack topology, tube types — then generates native preset files for every supported modeler. Every extraction is scored 0–100 and the score is published.