McIntosh MC75 preset
verified · 86/100 confidence. Complete schematic. All component values readable. Parameters derived directly from the circuit.
The original McIntosh MC75 is a mono hi-fi power amplifier, not a guitar amp, rated at 75 watts from one pair of KT88 output tubes. Half of a 12AX7 at the input feeds a 12AU7 and a 12BH7 in the driver stages, then a 12AZ7 (or 12AT7) drives the output tubes. The output transformer uses McIntosh's Unity Coupled design and has taps for 4, 8 and 16 ohms, plus 600-ohm lines and constant-voltage outputs from 25 to 240 volts. A Gain control and a sensitivity switch set the input level, and a silicon-diode supply provides the high voltage and the output-tube bias. It is the one-channel version of the stereo MC275 from the same years.
- Years produced: 1961–1970
- Made in: USA
- Wattage: 75W
- Channels: 1
- Preamp tubes: 1× 12AX7, 1× 12AU7, 1× 12BH7, 1× 12AZ7
- Power tubes: 2× KT88
Tags: american, vintage, hi-fi, power-amp, kt88, high-wattage, clean.
Schematic-derived preset files for the Neural DSP Quad Cortex and 16 Fractal and Line 6 modelers: Axe-Fx II/XL/XL+, Axe-Fx III, FM3, FM9, and the full Helix family (Floor, LT, Rack, HX Stomp, HX Stomp XL, Native).
Gridleak extracts amp parameters from original circuit schematics using AI vision — component values, gain staging, tone stack topology, tube types — then generates native preset files for every supported modeler. Every extraction is scored 0–100 and the score is published.