What tubes does the Rickenbacker M11 - Channel 2 use?

The Rickenbacker M11 - Channel 2 uses 2× 6SC7 preamp tubes and 2× 6V6 power tubes.

When was the Rickenbacker M11 - Channel 2 produced?

The Rickenbacker M11 - Channel 2 was produced 1953–1962.

Rickenbacker M11 - Channel 2 preset

Verified · 90/100 confidence. Complete schematic. All component values readable. Parameters derived directly from the circuit.

The Rickenbacker M-11 is a small octal tube amp with three inputs. One input feeds one triode of a 6SC7 and the other two share the second triode, each side with its own 500K volume, followed by a single 500K tone control. A second 6SC7 provides another gain stage and a paraphase phase inverter for a push-pull pair of cathode-biased 6V6s with a shared 250 ohm resistor, powered by a 5Y3 rectifier.

Years produced: 1953–1962
Made in: USA
Channels: 2
Preamp tubes: 2× 6SC7
Power tubes: 2× 6V6

Tags: american, vintage, 6v6, two-channel.

Schematic-derived preset files for 16 Fractal and Line 6 modelers: Axe-Fx II/XL/XL+, Axe-Fx III, FM3, FM9, and the full Helix family (Floor, LT, Rack, HX Stomp, HX Stomp XL, Native).

Gridleak extracts amp parameters from original circuit schematics using AI vision — component values, gain staging, tone stack topology, tube types — then generates native preset files for every supported modeler. Every extraction is scored 0–100 and the score is published.